Typically, orders are shipped within 24 hours after receiving them.
Due to some recent events and having to do a relocation, there will be a significant delay with orders and email replies.
We hope to have this resolved as soon as possible and we will try to get orders out the best we can while we do this relocation.
However, at times, with this process it may take us a week or two to get your order processed, so we ask to be patient with us so we can do the best we can to shorten this relocating process down.
We aim to do our best to keep all delays to a short as possible. Thank you for your understanding.
Orders returned due to an unverified address will be sent Ground Advantage with signature required and $10.00 reshipment fee.
Each bottle Cutting Kit listed below comes complete with the bottle scribing fixture and glass sanding material which includes silicon carbide grit and sanding cloth (100 grit size); also included in each kit are very thorough how-to instructions, order blank for replacement parts and a separate pamphlet showing an extensive number of creative bottle cutting projects.
Q: What’s the difference between the deluxe model and the standard model?
A: The Deluxe model is still the basic original platform but the cutting head has been replaced by an adaptor which allows for cutting on all surfaces of a round bottle (not just the vertical portions).
Unfortunately, due to the rise and uncertainties in the steel market, our prices are currently a reflection of this. We are working on ways to save our customers money in ways that we can control. We will do the best and work as quickly as we can in regards to this.
Kit #1.
|
$40.00 | |
Kit #2.
|
$55.00 |
Polishing Powder (#120 grit size) |
$2.50 | |
Cutting Wheel |
$5.00 | |
Cutting Adapter with Bottle Neck ConeAn adapter for cutting bottlenecks and other non-vertical surfaces. Please note: This item is already included within the Deluxe “Improved” Model Kits when ordering a Deluxe “Improved” Model Kit these will be sent with your order. If you do not wish to have these replacement parts sent please only order the Deluxe “Improved” Model.” |
$6.00 | |
Extreme-size attachmentAllows cutting on bottles or glass tubes with diameters down to 1 inch and/or, at the other extreme, serves as a better support for cutting really large diameter bottles; e.g., gallon bottles. Please note: This item is already included within the Deluxe “Improved” Model Kits when ordering a Deluxe “Improved” Model Kit these will be sent with your order. If you do not wish to have these replacement parts sent please only order the Deluxe “Improved” Model.” |
$6.50 | |
Front-Back ExtenderThis is an extra-long back stop that can extend from either the front or the rear of the cutting fixture. It’s principle use is to make it easier to cut the bottom off of a bottle very close to the end. It also can be used to cut bottles much larger in length; e.g., bottles whose vertical sides are much longer than 7 inches. Fits all models sold after Jan. 2012 Please note: This item is already included within the Deluxe “Improved” Model Kits when ordering a Deluxe “Improved” Model Kit these will be sent with your order. If you do not wish to have these replacement parts sent please only order the Deluxe “Improved” Model.” |
$5.50 | |
NEW! Diamond Surfaced Sanding Pad#400 Grit Size. 1 3/4″ x 1 3/8″. Perfect for inside and outside edges. Long Lasting. |
$7.50 |